Aluminum discs manufacturer
We are professional aluminum discs t manufacturer in Jinan, China. Our aluminum discs is wildly used for producing cookware, utensil, pizza pan, pressure cooker, bakeware, road sign and traffic sign. Since it is 99.5% pure aluminum, it has no break or orange peel problems when you spinning or deep drawing. We can produce both CC and DC aluminum discs.
Aluminum discs 1050
Aluminum discs 1060
Aluminum discs 1100
Aluminum discs 3003
What’s the information of aluminum disc?
Alloy Number: 1050,1060,1100,1200,3003,8011
Temper: O, H12, H14, H16, H18, soft ,1/2 hard, 1/4 hard
Surface treatment: Mill finish, non-stick surface,
Thickness: 0.4mm- 8mm
Diameter: 40mm-1360mm
Packaging: Standard seaworthy export packing – the height of the pallet is 90mm, suitable for unloading with forklift. For 1 x 20FCL can load 27 Tons.
Delivery time: 20 Days
Payment: T/T, L/C at sight
MOQ: 500KGS per size
Our aluminum discs are produced with by 99.7% pure aluminum ingot, so our aluminum circle without orange peel problems when you spinning or deep drawing.Our quality is good for deep drawing, spinning. So it is wildly used for cookware. aren’t made by aluminum scrap, it makes
Aluminum discs Chemistry Composition & Mechanical Properties & features:
Properties of the aluminum circle
1.Low anisotropy, which facilitates deep drawing ,Good plasticity, conductivity ,no four ears,
2.Strong mechanical properties
3.High and homogeneous heat diffusion
4.Ability to be enameled, covered by PTFE (or others), anodized
5.Good reflectivity
6.High strength-to-weight ratio
7.Durability and resistance to corrosion
8.Surface quality mill finish: no oil stain, no scratches, rolling marks or orange peel problem.
| Standard: ASTM-B209 ; GB/T3880-2012, EN485, Chemistry Composition /% | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NO. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | 2n | Ti | Zr | A1 | ||
| 4 | 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 一 | — | 0.05 | 0.05V | 0.03 | — | 99.5 | |
| 6 | 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | — | — | 0.05 | 0.05V | 0.03 | — | 99.6 | |
| 8 | 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | — | — | 0.04 | 0.05V | 0.03 | — | 99.7 | |
| 13 | 1100 | 0.95Si+Fe | 0.05~0.20 | 0.05 | — | — | — | 0.1 | i | — | — | 99 | ||
| 14 | 1200 | 1.00Si+Fe | 0.05 | 0.05 | — | — | — | 0.1 | — | 0.05 | — | 99 | ||
| 50 | 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | — | — | — | 0.1 | — | — | — | remainder | |
| Temper | Anti –tensile strength N/m㎡ | Elongation rate（%） | Dimension Control | Surface | Packing | |
|---|---|---|---|---|---|---|
| O (soft) | 78Mpa (8Ksi -12Ksi) | 35 (above 2.5 Ksi) | Qualified | Qualified | Qualified | |
| H12 (H22) | 95Mpa (11Ksi - 16Ksi) | 18 (above 9 Ksi) | Qualified | Qualified | Qualified | |
| H14(H24) Half - hard | 123Map (12Ksi - 17Ksi) | 7(above 9 Ksi) | Qualified | Qualified | Qualified | |
| H18 (Full Hard) | 140 (above 16Ksi) | 4 (above 10Ksi) | Qualified | Qualified | Qualified |
What is your aluminum circle range and dies sizes?
1) The range we can do is from 50 mm to 1360mm
2) Our dies sizes are like 150,155,160,165( 5 mm ranges),etc. Here is our chart for you:
| Φ30mm | Φ35mm | Φ40mm | Φ45mm | Φ50mm | Φ55mm | Φ60mm | Φ65mm | Φ70mm | Φ75mm |
|---|---|---|---|---|---|---|---|---|---|
| Φ80mm | Φ85mm | Φ90mm | Φ100mm | Φ105mm | Φ110mm | Φ115mm | Φ120mm | Φ125mm | Φ130mm |
| Φ135mm | Φ140mm | Φ145mm | Φ150mm | Φ160mm | Φ170mm | Φ180mm | Φ200mm | Φ205mm | Φ220mm |
| Φ230mm | Φ240mm | Φ245mm | Φ255mm | Φ270mm | Φ290mm | Φ300mm | Φ330mm | Φ350mm | Φ360mm |
| Φ390mm | Φ400mm | Φ420mm | Φ430mm | Φ450mm | Φ460mm | Φ480mm | Φ500mm | Φ510mm | Φ520mm |
| Φ600mm | Φ620mm | Φ660mm | Φ700mm | Φ710mm | Φ785mm | Φ795mm | Φ800mm | Φ801mmto Φ1360mm | |
| This is the only part of our dies size, please send me your order list, I can check our available diameter for you. | |||||||||
| ALLOY | CC Material | DC Material | Produce time | MOQ | 1 x20FCL | 1 x40FCL | |
|---|---|---|---|---|---|---|---|
| 1050 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | 25 Days | 500KGS each size | 27 Tons | 28 Tons | |
| 1060 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | |||||
| 1100 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | |||||
| 1200 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | |||||
| 3003 | FOB 2.36USD/KGS | FOB 2.48USD/KGS | |||||
ALUMINUM CIRCLE APPLICATION and usage:
Deep drawing cookware, spinning cookware, kitchen utensils，pizza pan, pressure cooker, bakeware, road sign, Building Material,Insulation, traffic sign,etc. aluminum Non stick cookware、for cookware bottom、for non-stick cookware、for non-stick pan、for non-stick pan、for kitchenware etc.
aluminium circle price per kgS and what’s your MOQ?
The aluminum circles price changes everyday and it depends on the market. FYI, today our aluminum circles price is 3.0USD per kg. Our MOQ is 500KGS per size.
FAQ:
1.Q:Do you produce large aluminum discs? What’s the max diameter disc you can produce?
A: Yes, we can produce large aluminum discs. We have 2 circular cutting machines and 5 dies pressing machines, the max diameter we can produce is 1500mm.
2.Q: What’s the different of CC aluminum circles and DC aluminum circles?
A: CC aluminum circles means Continuous Cast. The Manufacturing Process is Aluminum ingot – Melting – Continuous Casting – Coil – circles – Packing.
DC aluminum Circles means Direct casting. The Manufacturing Process is Aluminum ingot – melting – Square Billets – Direct casting- coil – circles.
As we all know that, many customer use our aluminum circles for cookware and utensil. There are 2 ways to make cookware-Pressing and Spinning. If you do spinning, use CC material, if you do pressing(DDQ) deeper than 150mm,please use DC material.
3. What’s the Manufacturing Process of aluminum circle?
There are 2 ways to produce aluminum circle, circular cutting and dies cutting.
For circular cutting,it can make very big sizes(1000mm more),but the circle will be not very round, and the edge will be very sharp, easy to hurt workers.
